按位取值是指該測點的數據類型為16位有/無符號、32位有/無符號時，將讀到的值按BIT位解析，起始位和終止位相同時，表示解析1位數據，值為0或1；起始位和終止位根據數據類型不同，最小0，最大31；
例如讀到的值為十進制的10，那么將其轉換為二進制為0000 1010，其第0位(起始位和終止位都配置成0)為0，第1為1，第2位為0，第3位為1。
杭州領祺科技智能物聯網關支持MODBUS采集、轉發、監聽，支持485串口MODBUS異構組網，支持多上位機WEB組態同時接收信息，支持MODBUS和M-BUS協議轉換，MODBUS TCP MODBUS RTU等各種協議轉換、混采。
在線幫助文檔
https://dingiiot.com/help-doc/drive_page/modbus-rtu%E9%87%87%E9%9B%86/
設備地址：從設備的地址編號
CRC校驗：用來確認接收消息完整性和正確性
Java代碼取值實現
網上有許多開源的modbos工具包，例如modbus4j、jamod等。這里選用jamod，以Modbus RTU通訊為例
maven依賴如下，同時需要在C://Windows//System32目錄下，放入RXTXcomm.jar、rxtxParallel.dll、rxtxSerial.dll三個文件，用來實現串口通信
net.wimpi
jamod
1.2
創建和串口的連接
public class ModBusConnection {
public static SerialConnection getSerialConnection() throws Exception {
SerialParameters parameters = new SerialParameters();
// 串口名稱
parameters.setPortName("COM2");
// 波特率
parameters.setBaudRate(9600);
// 數據位8位
parameters.setDatabits(SerialPort.DATABITS_8);
// 停止位2位
parameters.setStopbits(SerialPort.STOPBITS_2);
// 無奇偶校驗位
parameters.setParity(SerialPort.PARITY_NONE);
// rtu模式，取代默認的ascii模式
parameters.setEncoding("rtu");
SerialConnection connection = new SerialConnection(parameters);
connection.open();
return connection;
}
}
創建request取數工具類
public class ModBusUtil {
/**
* 讀寫 boolean類型 function code 01
* @param connection con
* @param param param
* @return BitVector
*/
public static BitVector readCoils(SerialConnection connection, ModBusRequest param) throws Exception {
ReadCoilsRequest request = new ReadCoilsRequest(param.getAddressNo(), param.getWordCount());
request.setUnitID(param.getSlaveId());
ReadCoilsResponse response = (ReadCoilsResponse) getResponse(connection, request);
return response.getCoils();
}
/**
* 只讀 boolean類型 function code 02
* @param connection con
* @param param param
* @return BitVector
*/
public static BitVector readInputDiscretes(SerialConnection connection, ModBusRequest param) throws Exception {
ReadInputDiscretesRequest request = new ReadInputDiscretesRequest(param.getAddressNo(), param.getWordCount());
request.setUnitID(param.getSlaveId());
ReadInputDiscretesResponse response = (ReadInputDiscretesResponse) getResponse(connection, request);
return response.getDiscretes();
}
/**
* 讀寫 int類型 function code 03
* @param connection con
* @param param param
* @return InputRegister
*/
public static InputRegister[] readMultipleRegisters(SerialConnection connection, ModBusRequest param) throws Exception {
ReadMultipleRegistersRequest request = new ReadMultipleRegistersRequest(param.getAddressNo(), param.getWordCount());
request.setUnitID(param.getSlaveId());
ReadMultipleRegistersResponse response = (ReadMultipleRegistersResponse) getResponse(connection, request);
return response.getRegisters();
}
/**
* 只讀 int類型 function code 04
* @param connection con
* @param param param
* @return InputRegister
*/
public static InputRegister[] readInputRegisters(SerialConnection connection, ModBusRequest param) throws Exception {
// 寄存器地址編號 屬性數據數量
ReadInputRegistersRequest request = new ReadInputRegistersRequest(param.getAddressNo(), param.getWordCount());
// 從設備編號
request.setUnitID(param.getSlaveId());
ReadInputRegistersResponse response = (ReadInputRegistersResponse) getResponse(connection, request);
return response.getRegisters();
}
/**
* 獲取response
* @param connection con
* @param request req
* @return ModbusResponse
*/
private static ModbusResponse getResponse(SerialConnection connection, ModbusRequest request) throws Exception {
ModbusSerialTransaction transaction = new ModbusSerialTransaction(connection);
transaction.setRequest(request);
transaction.execute();
return transaction.getResponse();
}
}
main方法測試類
public class SerialPortTest {
public static void main(String[] args) throws Exception {
SerialConnection connection = ModBusConnection.getSerialConnection();
ModBusRequest param = new ModBusRequest();
// 從設備id編號
param.setSlaveId(1);
// 寄存器地址編號 這邊使用了function 01，addressNo=0表示寄存器地址為00001
param.setAddressNo(0);
// 讀取數據個數
param.setWordCount(1);
InputRegister[] registers = ModBusUtil.readInputRegisters(connection, param);
for (InputRegister register : registers) {
System.out.println(register.getValue());
}
connection.close();
}
}
400-001-8882
